Machine trial instructions:Square single buttonMachine, after you get it, you will find that the power is plugged in, and you can directly burn it without pressing the button. Please don't be nervous about this situation. This is normal.

The reason is that the button used by the machine is a thermal induction button, which is different from that used at home. Thermal induction button is once pressed, it will jump only after the temperature reaches a certain value. Each machine is powered on before it is sent out to check whether it is normal, so you must press the start button of the machine.

The induction limit of the thermal induction button of our machine is 160 degrees, that is to say, once the water in the inner tank is dried, the temperature will automatically power off and jump off once it exceeds 160 degrees. When I checked, I just pulled out the plug after a look at the power supply, so the temperature of the liner obviously cannot reach 160 degrees, and this thermal button will not jump off, therefore, when you first boil water after getting the machine, you will find that the machine is plugged in and burned directly....

This is why when you burn the machine for the first time after getting it, you can directly burn it without pressing the button. Simply put, the button has been pressed, and you can press it again when you need to burn it again after burning it once.